ARE YOUR PREMISES PROTECTED FROM ATTACK BY DETERMINED INTRUDERS? DO YOU NEED A ROBUST SOLUTION TO SECURITY?
Our High Security Doors are fully certified LPS 1175 security doorstep designed to offer an enhanced level of security for a wide range of premises, from domestic or light commercial premises through to those at high risk of attack by experienced intruders.
LPS 1175 certified security doors are designed to offer an enhanced level of security for premises requiring a higher level of protection than that offered by a basic steel hinged doorset. The doors are specially constructed to individual project requirements and each door has internal reinforcement designed to resist sustained attack from a wide range of tools.
With a broad range of high end hardware systems on offer, our doors are available in both single and double configurations up to 2500mm x 2600mm*. Our High Security doors are available as locking or escape versions and a limited range of vision panel options are also available.
Products certified to LPS 1175 SR2 standard provide up to 3 minutes of resistance to opportunist attempts at forced entry of protected premises using a range of mechanical tools, including: screwdriver, levers, spanner, bolt cutters, claw hammer, drill, shears, etc.
Products certified to LPS 1175 SR3 standard provide up to 5 minutes of resistance to determined attempts at forced entry of protected premises using a wide range of tools, including: cordless tools, short axe, cold chisels, crow bar, brick bolsters, gas torch, etc.
Products certified to LPS 1175 SR4 standard provide up to 10 minutes of resistance to experienced attempts at forced entry using a wide range of tools, including: high powered cordless tools, felling axe, sledgehammer, power drill, disc grinder, jigsaw, etc.
To complement our range of LPS 1175 doors, our TUFF-VENT doorset offers the maximum free airflow whilst maintaining strength and security. A standard 2mm galvanised steel louvre vane is used throughout, welded at every junction for additional strength. Side panels and overpanels can also be manufactured to make up large openings where large doors may be impractical.
When calculated on a 1000mm x 2100mm over frame door, the TUFF-VENT achieves a free area of 55% (based on the area of the louvres only, this equates to 72%). TUFF-VENT doors are fully CE compliant and can be polyester powder coated in a standard range of colours.
Please note our TUFF-VENT doors are not available certified to LPS1175